DeltaTrak.-Electronic thermometer-12207
$48.00
• High/low temperature alarm setting for external sensor
• Internal/External sensor reading switchable on LCD
• Min/Max memory for internal and external sensor,lowest & highest reading stored for instant recall.
• Detachable external sensor
• °C / °F selectable
• Display backlight
• Foldable stand for placement on flat surfaces
• Mount to vertical surfaces with built-in magnets or Velcro strip (included)
• Mount probe with plastic bracket, or suction cup for glass surfaces (included)
无货
Free shipping on orders over $50!
- Satisfaction Guaranteed
- No Hassle Refunds
- Secure Payments
Description
Button function introduction
1.1. Check whether the appearance of the incoming thermometer is scratched, whether the protective film is in good condition, and whether the temperature sensing resistance wire is broken or not
Dirty phenomenon.
1.2 Open the battery door, pull out the battery insulation, the buzzer of the thermometer should ring three times, and the LCD starts to display the temperature
Degree.
1.3 Press the “MAX/MIN” button, the “MAX” icon will be displayed in the upper left corner of the LCD, and then press the display: “MIN”.
Press the third to return to normal mode.
1.4 Press the “INT/EXT” button, and the icon above the LCD temperature display unit is between “IN” and “OUT”.
Switch back. When “IN” is displayed, it means that the LCD displays the temperature detected by the internal sensor, and displays
“OUT” indicates that the LCD displays the temperature detected by an external sensor.
1.5 Press the red button on the back of the thermometer to change the temperature display unit: “° C” or “° F”.
1.6 Press and hold the “ALARM SET” button for 3 seconds, and a “HIGH/OUT” icon will be displayed on the LCD and flash.
At this time, press the “° C/° F” button on the back of the thermometer to set the high temperature alarm point.
1.7 Press the “ALARM SET” button again, and a “LOW/OUT” icon will be displayed on the LCD and flash.
At this time, press the “° C/° F” button on the back of the thermometer to set the low temperature alarm point.
1.8 When the light is poor at night, you can press and hold the “light” button to check the temperature, and a light will light up at the bottom of the screen.
DeltaTRAK 12207_Data_Sheet.pdf
Additional information
| Brand | DeltaTrak. |
|---|---|
| Model | 12207 |
| Temperature Range | Internal Sensor: 14°F to 122°F |
| Accuracy | ±1.0°F (±0.5°C) from -4°F to |
| Resolution | 0.1°F/°C |
| Display Reading Update | 10 seconds |
| Sensor | Thermistor |
| External Sensor Cable Length | 10 ft (3m) |
| Display Window Size | 1.9 in. (W) x 0.8 in. (H) (48 |
| Product Size | 2.9 in. (W) x 2 in. (H) x 0.6 in. |
| Weight | 2.5 oz. (70 g) |
| Body Casing | Polycarbonate and ABS plastic |
| Probe | Stainless steel probe, 0.875 |
| Battery (included) | 3V CR 2032 |
| Certification / Calibration | CE mark, N.I.S.T. traceable |
English 
Chinese
Reviews
There are no reviews yet.